Feature Requests
If you’ve got a feature request, you’ve come to the right place! Please relay your request request here, along with any additional details you think might be helpful.
This is not the spot for feedback on current features, only new plausible ideas will be considered. Please be courteous of others and upvote if you believe strongly enough in an idea!
117 results found
-
Stop asking me for 2FA EVERY single time!
Every time I login, it requires a 2-factor auth code.
Can we set it so it doesn't ask us the code each and every time we login? I login daily and it drives me insane!
Instead, it could ask us for it once every 30 days or only when signing in on a new browser?19 votesHi all,
Thanks for the feedback here! We’ve added a “Don’t ask again on this computer” checkbox that sets a browser cookie to remember your preference. Logging in from another browser or clearing your cookies will still force 2FA validation.
-
Time frame based log search
Searching the log when only time of event is known is very clumsy because the log cannot be filtered with time. Going through pages works with small amounts of log but as there is lots of log then it gets really time taking process. Even worse if you have to repeat the process later on.
Add options to filter the log by begin and end time.
19 votesHello,
This week, we released several improvements to our logs feature. You can now select a date/time range and adjust the order (ascending/descening) of the results.
More improvements are launching for this page over the next few weeks, let me know what else you think we can do on this page to make it more useful for you.
Josh
-
Upon login, view domains from my default region instead of fixed US region.
I'm only using the EU region for my domains. But it always opens up the US region.
It would be great to have a setting where you can choose which region it should open by default.18 votesHowdy folks,
I’m happy to announce that we’ve released our new Control Panel, which combines EU and US assets under one unified view!
-
Make API keys easier to find
Can't find the API settings now!!
17 votesHi all,
We’ve added a link to API keys in the Settings drop-down, on the main dashboard page, as well as the account drop-down in the upper right hand corner. Let me know if you’d like to see further optimizations!
-
Google Authentication
Allow users to login with google and diable mailgun authentication.
17 votesHowdy all,
I’m pleased to announce that we’ve released the ability for users to login to the Mailgun UI with Google Authentication!
Setup is quick and easy. Check out our help article here: https://help.mailgun.com/hc/en-us/articles/360036626153-Google-Authentication.
Please let me know if you have questions or feedback!
-
Add subject and from to templates
Feature request: Add a subject and a from: field to the templates. That way we can change a subject line without redeploying our server-side software.
15 votesHi all,
Thank you for your patience here. We have added the ability to store From address, Subject and Reply-to headers directly to a template. This is available via our API (pass headers parameter with JSON key:value dictionary when creating or updating a template), as well as our UI. You can then send a message with just the recipient and template name.
-
Add "limited user role" for Mailgun account
Mailgun currently has the ability to add additional admin users to an account. It would be really useful to also allow the addition of users with a more limited role, for example only being able to view the logs.
14 votesMailgun now offers role-based access control.
-
Add Option to set Daily Limit on emails sent
In the past, having experienced a site being hacked and then auto-sending email, we have found our monthly limit being exhausted before having chance to firefight the situation. Ideally we'd like to set a self-imposed daily limit on what we can send so we don't find all our credit used up before we have chance to fix any problems.
14 votesWe now offer the ability to set an account wide limit that will notify you when you cross 50% and 75% of the defined threshold before imposing a limit on your account. See the custom message limit setting under Account Settings.
-
Use https protocol instead http in tracking url
Now we have troubles with removing our domain from blacklist because of using non-secure protocol in tracking pixel: http:email.ourdomain.com/bla-bla-bla. Your system doesn't provide ability to use https now, but it would be very useful to provide it
12 votesHello,
Just to provide closure here - Mailgun does support secured tracking links. We offer an industry first certificate hosting on our side that does not require complex and costly CDN management. Reach out to our support team for assistance.
-
Search log easily by email address
Make logs properly searchable. We used to be able to put a single email address in the logs search box, and see log entries confined to email sent to that address specifically. However, this no longer works, it looks like the search queries everything that contains the address (e.g. message body and the like)
11 votesHi all,
This bug has been fixed!
-
Make the text log use the same color scheme as the bar graph's color scheme
In the Logs section, the bar graph shows blue for accepted and green for delivered. This color scheme is not honored in the text version of the logs, however.
In the text body of the log, "Delivered" entries should stay green, but "Accepted" entries should be blue to match the corresponding color of the bar graph. This would allow me to more easily scan the logs for the proper information.
10 votesHi all,
Very sorry, this was an inadvertent change with a recent release. This bug has been fixed.
Amazing what a missing semicolon will do, eh? ;)
-
Fix quick view for templates
Log Quick View for messages using templates doesn't work. It currently shows just the template name, and doesn't render it.
9 votes -
9 votes
You can now set a custom message limit in the account settings page of the Mailgun dashboard.
-
Change DKIM selector using the API
I'd like to set DKIM Selector for a domain using the API
8 votesThis is available via a PUT call to /domains//dkim_selector as outlined in our docs: https://documentation.mailgun.com/en/latest/api-domains.html#domains
-
Automatically warm up new Dedicated IP's
When a new dedicated IP is assigned to a domain, Mailgun should have the option to automatically 'warm' the IP.
If the user selects this option, the IP should be used to send 10000 the first day, 11000 the second, etc until warmed. Currently there is no way to restrict the number of emails sent via the IP.8 votes -
Add ability to describe IP Whiltelist entry
Currently, when you add an IP to the IP Whitelist, there isn't a way to add a description. The result is just a list of IPs. It would be great to add a description to an IP (for example: "Azure functions") so that we know what IPs are there and why.
7 votes -
Login form with login and password shown at the same time
Please, update the login page so that I can use my password manager to fill both login and password at the same time. The way it is now, I have to tell the password manager to fill the login, click ok, tell the password manager to fill the password, click ok.
7 votes -
Provide a WYSIWYG template Editor
Please make a better WYWIWYG email editor. Have a look at your competitors, like SendInBlue. There system is excellent. See attached image of their email editor. By comparison editing templates in MailGun is like living in a dark cave with no electricity.
7 votesHello,
We launched our updated drag-and-drop editor last year and further development in this functionality continues.
https://www.mailgun.com/blog/product/mailgun-template-builder/
-
Reintroduce error summary in Logs for Failed messages
This isnt an idea as such, but I just wanted you to know the new Mailgun view for reading logs (which we do daily) is terrible for us.
We always need to ensure that the failed messages are at the remote end, or a typo by the client. We now need to open every failed message to ensure this is not the case (sometimes hundreds). In the previous view it was possible to have a summary of the issue without going into the log, which was perfect. Please look to revert this or atleast give some better viewing options for…
6 votesHi all,
Thanks again for your feedback here. We’ve re-introduced the delivery status message to the logs page and have set it to show as default. Please let me know if you have additional feedback!
-
Enable HTTPS on eu.mailgun.org
Hi! Please enable HTTPS on eu.mailgun.org because I can't configure Tracking.
6 votes
- Don't see your idea?